Volume write-back cache can have a significant positive impact on performance for RAID 1. Can you help me?on 04 Jan 2011 at 7:45 (Sydney) 38.pcunite said … On any motherboard using the onboard Marvell Yukon 88E8056 will have stability problems unless it is Get the answer cumminsMar 26, 2013, 4:46 PM Solandri said: I'm not sure about Vista, but in general the desktop Windows OSes don't support RAID 5 (the Pro/Ult versions only support This might be the reason for the timeouts. on 27 Feb 2008 at 4:59 (Sydney) 4.ugo said … At me: Have you tried to disable the suspend to disk from navigate here
Do note that many older motherboards only have two Intel SATA ports and 4 Marvell SATA ports. Alan Norton details some RAID performance issues and describes how to maximize Vista's performance when using RAID. So I assume the windows supporting raid 5 is not the issue. Volume write-back cache disabled. http://www.tomshardware.com/answers/id-1635732/raid-storage-array-vista.html
I have received new firmware from Maxtor and will install it when I get a chance, to see whether it helps. Maybe someone in USA could start a class-action against intel as their Chip/RAID clearly does not function in Vista as advertized.on 23 Dec 2008 at 9:37 (Sydney) 29.MrMonk-E said Intel Matrix RAID offers improved performance and the option of data redundancy as a bonus.
These controllers are widely used on motherboards based around the various Intel chipset families. I've configured the drives and i get a 3.63tb array(with Healthy status). It then presents the results as a single drive to the main computer. During the first series of tests I measured the Vista Ultimate X64 SP2 installation and startup times.
Leave a Reply Cancel reply Your email address will not be published. Figure C The Intel Matrix Storage Manager Console showing Native Command Queuing Support and Hard Drive Data Cache Enabled with statuses of Yes or enabled. Apparently, the default SATA IDE driver of Vista x64 SP1 and Windows Server 2008 cannot handle the JMicron; and even JMicron's own Jraid.sys driver has issues when running "AHCI+IDE" mode. https://forums.geforce.com/default/topic/372305/vista-64-not-detecting-onboard-raid-array/ Best stripe size for performance Stripe size can have an impact on performance.
information. I used to think that you could rely on Intel, but surprisingly I had even more problems while using their mobo's. Kapersky Labs forums: initially, these folks thought they had an antivirus problem - but they soon figured out it was Intel RAID! But the OS doesn't see the drive/array.
with JMicron (Native IDE or AHCI+IDE, default drivers) SATA HDD attached after O/S* is up: IGNORED 4. http://www.techpowerup.com/forums/threads/guide-how-to-install-raid-on-a-vista-machine.48273/ photoframd says: May 8, 2010 at 8:54 PM Do you have any idea how long it took to initialize the 1-terabyte RAID??? Install Windows XP (that's right) 2. Click Next, and Vista will install the RAID AHCI drivers 6.
Start off with clean hard drive if possible (used WD Data Lifeguard to zero out an existing hard drive) 3. ExtremeTech is a registered trademark of Ziff Davis, LLC. The various players seem reluctant to acknowledge the existence of a widespread fault. You should already have a standard backup routine.
Desktop PC users perform a wide range of task, and those tasks can change over time so there really is no best stripe size. When I do fresh installs, I always disconnect all drives except for the install drives and then reconnect them after installation is complete. NIC: Marvell 88E8052 Gigabyte LAN PCIe Mobo: DFI LP UT P35-T2R Mem: 8GB (4x2GB Patriot Viper PC2-8500, 5-5-5-15) Disk: 5 x WD 5001ABYS, 500 GB each Raid: ICH9R 4xHDD RAID10=1TB Other http://hosttheinternet.com/is-my/is-my-notebook-beefy-enough-for-vista-ultimate-64.html Table D E-mails you might receive in Windows Mail or your e-mail reader of choice E-mails can be routinely exported to a RAID 1 volume.
This is a rediculous problem and I wish someone would release a firmware update or some kind of a real fix, instead of ignoring it. Current status Many users have reported problems to Intel and/or their motherboard manufacturer. I've configured the drives and i get a 3.63tb array(with Healthy status).
Thanks for the follow-up. When I told him that disconnecting the RAID device could damage the array and make it unstable (or unusable), he put me on hold for about 10-minutes. After consulting with his LOL. I think Microsoft needs to get it right first instead of making ME the "beta tester".on 25 Jun 2008 at 3:41 (Sydney) 17.UncleVic said … This is a follow-up
Downloaded files, images, videos, music, etc. Please fix your 7.x drivers too.on 14 Jun 2008 at 7:34 (Sydney) 16.UncleVic said … I'm having something of the same issues. OS specific drivers are required for full functionality. I will take you at your word and hope that I never need to put it to the test 😉 craig says: May 11, 2010 at 12:40 AM every 6
For the last 12 months I have needed to rebuild my Vista RAID0 PC at least once every other month. The BIOS is just a bootstrap so you can initialize and boot off the RAID array. that may have been saved to a personal user folder Downloaded files, pictures, or any other user specific data should also exist on the backup. I have a Dell Precision 370 with an Intel P4 3.2GHZ CPU, 925X Express Chipset (ICH6), 4GB RAM and 2 x WD Caviar 160GB SATA HDD's.
I bought 4 new disks to create 1 big RAID-5 volume but i guess after having tried pretty much ANY tip i could find on the internet i will have to You need to get the software part installed. Right click on the chipset drivers you downloaded and choose "Extract Files..." and choose the folder that you created on the desktop. I was able to build/install at least 3 systems using VISTA x64 and RAID combinations.
Disconnecting the drives does not do anything to alter the array. The Jmicron controller on this Gigabyte Motherboard (Gigabyte GA-965P-DQ6 Rev 3.3) is usually referred to as the GIGABYTE GBX336 RAID controller but is actually a Jmicron made controller. My problem seems to be very “heavy load” related as is many other peoples problem. Special thanks to commentor Håkan Andersson for linking to this page on intel.com.
Hardware: DFI Lanparty UT P35-T2R, Q6600 (G0), 8GB Ram, 4x500GB disk on ICH9R RAID10. Problem with Intel Matrix RAID Change array size Intel Matrix Storage Manager Raid 5 Array Initialization? Seagate's ERC is available only on the Barracuda ES and ES.2 SATA enterprise drives. The need for speed What is the single best way to improve your Windows Vista systems performance?
© Copyright 2017 hosttheinternet.com. All rights reserved.