Check www.seagate.com/support/kb/disc/faq/137_overview.html for tips on resolving this problem. Thanks Reply Hans on November 29, 2008 at 11:38 am Great Article. If you installed a drive on a connector that was not in use, you may have to set the corresponding drive to "Auto." If your BIOS has an auto-detect feature, you Make sure you get one that matches your drive - Serial ATA for an SATA drive; ATA/100 or ATA/133 for an IDE drive; SCSI for a SCSI drive.)Data cable for the http://hosttheinternet.com/hard-drive/issues-with-installing-sata-hard-drive-on-win7.html
It had been a long time since I had changed a hard drive and I was a little concerned about doing it. I did have just a couple of questions. And if you missed the first part of this two part article, you might want to check it out before reading this one. Article Tools: | Print Research by Category Desktops Laptops Tablets & E-Readers Printers PC Components Research By Brand Samsung Apple Dell Hewlett-Packard Lenovo Connect With Us Contact Info Meet the Editors http://community.acer.com/t5/Windows-7/Issues-relating-to-installing-a-new-Hard-Drive/td-p/436871
And they get to set whatever prices they want. Reply sr.robato_pcola_fl on March 18, 2009 at 5:11 pm nice article! I have lots of data on there that I need to keep can I install it without formatting?
Another jumper setting, which you can use if you have an 80-conductor ribbon cable, is Cable Select. 80-conductor cables can be identified by their much finer wires compared to 40-conductor cables Saved me a lot of ‘messing about' time. I am trying to replace my current hard drive and install WindowsXP on it. Installed A New Hard Drive Now Computer Won't Turn On Since I'm an old geezer and not tech savvy, I need the kind of help you provide.
Does that thing address to my hard drive? Installed New Hard Drive And It Wont Boot But having read this article in advance, I felt confident I could have overcome installation issues. HB 199, or the Fair Repair Act, guarantees our right to repair digital equipment like computers, refrigerators, cell phones and tractors. I'm somewhat of a techie and i do understand all the jargon.
Formatting could take an hour or more, depending on drive capacity. How To Boot A New Hard Drive If you plan on using another operating such as Linux or Unix, disk partitioning will be performed during the installation process. All rights reservedDell Systems Dimension 2400 Series BIOS version A05 http://www.Dell.comKeyboard failureSil 3114 SATARaid BIOS Version 5.0.39 Copyright (c) 1997-2004 Silicon Image, Inc.Press or F4 to enter RAID utility 1 WDC Forum Replacing Sony vaio internal hard drive cost in india Forum Moved HP labtop Hard drive to Sony Vaio vgn-385e Forum my Sony VAIO has a bluray drive but won't play
Older Windows versions, such as 98 and Me, make you do this from DOS. https://www.lifewire.com/how-to-replace-a-hard-drive-2626200 I am in the happy Medium of the geek world. New Hard Drive Won't Boot Windows If read/write errors occur only after the system has been running for a while particularly during warm weather or if you have recently added a fast video card or other heat-producing What To Do After Installing A New Hard Drive Play How the Game Should Be Played.
can some one please help me. http://hosttheinternet.com/hard-drive/installing-second-hard-drive.html If you’re looking for a fresh start, you’ll likely need to have your DVD-ROM or CD-ROM in proper working order. When your tractor breaks or your cell phone stops working, they want to be the only people who can fix it. Reply Jimmy on December 1, 2008 at 8:49 pm Thanks, I was having an issue initializing my second SATA hard drive. Computer Won't Boot With Second Hard Drive
Reply Mark barbee on August 31, 2009 at 7:25 pm Here's one for ya. Also, you mentioned something that concerned me; formatting the drive. My SATA cable is now connected to both my internal HD and the new HD I have just put in, and it then goes to the motherboard. weblink RSS ALL ARTICLES FEATURES ONLY Search Hardware Upgrade: How To Install A New Hard Drive, Pt 2, Troubleshooting By Eric Z Goodnight on September 20th, 2011 Last week we took a
Troubleshooting An Unrecognized Drive It’s not a perfect world, and sometimes, when you install a new drive, sometimes your PC doesn’t recognize it. How To Boot A New Hard Drive In Laptop All Rights Reserved Tom's Hardware Guide ™ Ad choices Seagate ␡ Sign In as Consumers Partners & Suppliers ␡ My Dashboard My Profile Logout ␡ EXTERNAL / CONSUMER ▾ ▴ Then, power down your PC, unplug all cables, and open the case.
D+ Reply Stefen Kaur on November 11, 2008 at 12:50 pm I have a question. These are usually how the motherboard connectors are going to look. If you don't know the difference between ide & sata then you need to read up on that before trying to fit a new disk drive or you'll end up buyiing Pc Won't Boot From Hard Drive The Fair Repair Act is simple.
My HD crashed so I purchased a new SATA drive. So, I would re-check the SATA cables and moving it to other SATA connections and still no second Hard Drive. i have a question tho,, i want to add a second drive simply for photo work. http://hosttheinternet.com/hard-drive/inspiron-5558-hard-drive-issues.html You’ll need to connect one to the drive, and another to the appropriate connector on the motherboard.
What does that mean? You have to click the Action button. Creative Professionals The answer for streamlining video, photo and audio workflows. Took me hours of wading through other websites of gobbledygook to get nowhere.
Please advise me physical installation, formatting and set partitions to the drive. Here, we installed Seagate's Barracuda 7200.10, a $124, 320GB Serial ATA (SATA) drive, inside a Dell Dimension 8400 running Windows XP Home Edition. That's not true of IDE, where a jumper indicates whether a drive is a primary ("master") or secondary ("slave") drive. Jumperblock shunts by Bloodshedder, available under Creative Commons. Nappe.svg by Wereon, available under Creative Commons.
sometimes learning new stuff is also learning how to say it. If the drive is very hot, leave the side panel off and point a standard house fan directly into the case to cool the drive. I have set the jumpers on old HD to slave, master, cable select. So when I get to the prompt that ask to insert a disk in A:/ the only option I have is to insert the CD… I've tried to set my BIOS
If the hard drive temperature seems reasonable and the power supply is not the problem, you may have a cable problem. I'll be back for more later. Now, it's time to do the same for electronics and other equipment. Reply Ryan O.
If so, hunt for a free Molex-style lead. Where and how are the cables connected? Use a single cable for each device, when possible if you’re having a lot of issues. Most hard drive manufactures will include these brackets with the hard drive.
I bought a new hard drive and used the Restore CD to format it. Skip to Main Content Search Help Tips Dictionary History Forums Contact You are here: Help > Hardware Help > Hard Drive Help How to install a hard drive Buying tips and other then that its not able to without this the drive will not read and be able to transfer files Reply Gary Hart on August 7, 2007 at 4:46 am Thanks
© Copyright 2017 hosttheinternet.com. All rights reserved.